Transfer Paper - Bambi | MOT Myrdal Orthopedics

Transfer Paper - Bambi

Transfers are easy to use and will compliment your finished product. For best results, use our release agent on the paper and roll the paper out (or place a spot transfer) on your heated plastic. Return the plastic to your oven for approximately one minute. Remove the plastic from your oven and carefully peel or remove from the paper from the heated plastic. Pull your plastic as usual being careful not to distort the image or pattern you have applied. Client acceptance is often increased with the implementation of a color and or design.
Common transfers are regularly stocked items. Please contact us for particular transfers that may not be listed here. We will stock items identified by our customers for their future applications

1. Ensure the plastic is clean and free from any dust or grease.
2. Cut a piece of transfer paper slightly larger than the size of your plastic panel to allow easy removal.
3. Heat the plastic until it turns completely transparent and the surface temperature is at 190°C/374°F (leave the transfer paper on top of the oven while you heat the plastic as it will help with the release of the ink).
4. Apply the transfer paper with the design facing down, starting at one end of the plastic panel gradually working towards the other end avoiding any air bubbles and continually smoothing against the plastic with your other gloved hand.
5. Once the transfer paper is on and smoothed over, leave the plastic with the transfer paper on in the oven with the door closed for 20 ‐25 seconds.
6. After this period, peel the transfer paper off from one edge continuing across the whole plastic panel until it is completely removed and the ink is left in the plastic.
7. Mould the plastic as normal.

= Regular Stock = Special Order You must be "logged in" to view item prices and add items to shopping cart.